Specifications

Engine

Type 4-cycle water-cooled, common rail direct injection
Aspiration Turbocharged with waste gate, intercooled, cooled EGR
Aftertreatment DOC and DPF and SCR system
No. of cylinders 4
ISO 14396 105 kW at 2 000 min-1
ISO 9249, nett 100 kW at 2 000 min-1
SAE J1349, net 100 kW at 2 000 min-1
Maximum torque 550 Nm at 1 600 min-1
Piston displacement 4.038 L
Bore and stroke 101.0 mm x 126.0 mm
Batteries 2 x 12 V / 93 Ah

Hydraulic System

Main pumps 2 variable displacement axial piston pumps
Maximum oil flow 2 x 117 L/min
Pilot pump 1 gear pump
Maximum oil flow 23.4 L/min
Steering pump 1 gear pump
Maximum oil flow 23.5 L / min
Travel 1 variable displacement axial piston motor
Swing 1 axial piston motor

UPPERSTRUCTURE

Revolving Frame

D-section frame for resistance to deformation.
Swing Device

Axial piston motor with planetary reduction gear is bathed in oil. Swing circle is single-row. Swing parking brake is spring-set/hydraulic-released disc type.

Swing speed ……………. 11.9 min-1

Swing torque ……………. 34 kNm

Operator’s

Cab Independent spacious cab, 1 005 mm wide by 1 675 mm high, conforming to ISO* Standards.

* International Organization for Standardization

Undercarriage

Creeper speed range 0 to 2.2 km / h 0 to 2.7 km / h : Rear blade only spec
Low speed range 0 to 8.6 km / h
High speed range 0 to 35 km / h
Maximum traction force 102 kN 74 kN : Rear blade only spec
Gradeability 70% (35 degree) 50% (26 degree) : Rear blade only spec
Min. turning radius  6 800 mm 6 600 mm : Rear blade only spec