Specifications

Engine

Type 4-cycle water-cooled, common rail direct injection
Aspiration Turbocharged, intercooled
No. of cylinders 4
ISO 9249, net 90.2 kW (121 HP) at 2 200 min-1 (rpm)
EEC 80/1269, net 90.2 kW (121 HP) at 2 200 min-1 (rpm)
SAE J1349, net 90.2 kW (121 HP) at 2 200 min-1 (rpm)
Maximum torque 402 Nm (41.0 kgf m) at 1 800 min-1 (rpm)
Piston displacement 2.999 L
Bore and stroke 95.4 mm x 104.9 mm
Batteries 2 x 12 V / 70 Ah

Hydraulic System

Main pumps 2 variable displacement axial piston pumps
Maximum oil flow 135 + 180 L / min
Pilot pump 1 gear pump
Maximum oil flow 30.2 L / min
Steering pump 1 gear pump
Maximum oil flow 30.2 L / min
Travel 1 variable displacement axial piston motor
Swing 1 axial piston motor

UPPERSTRUCTURE

Revolving Frame

Welded sturdy box construction, using heavy-gauge steel plates for ruggedness. D-section frame for resistance to deformation.

Swing Device

Axial piston motor with planetary reduction gear is bathed in oil. Swing circle is single-row, shear-type ball bearing with induction-hardened internal gear. Internal gear and pinion gear are immersed in lubricant. Swing parking brake is spring-set/hydraulic-released disc type.

Swing speed ………………. 13.7 min-1 (rpm)

Operator’s Cab

Independent spacious cab, 1 005 mm wide by 1 675 mm high, conforming to ISO* Standards. Reinforced glass windows on 4 sides for visibility. Front windows (upper and lower) can be opened. Reclining seat with armrests; adjustable with or without control levers.

* International Standardization Organization

Undercarriage

Creeper speed range 0 to 1.8 km / h
Low speed range 0 to 8.6 km / h
High speed range 0 to 35.0 km / h
Gradeability 70 % (35 degree) continuous
Min. turning radius 6 800 mm

Axle:

All-wheel drive. The front axle can be locked hydraulically in any position.

Oscillating front axle  …………….. +7 to -7 degree

Brakes system:

Maintenance free wet-disc brakes on axle are standard. Fully hydraulic service brake system.