Leasing, sales and services of equipment for engineering, construction, shipyard / ship building, oil & gas, and offshore industries.
HR 180
Specifications Nominal Torque 171,900 lbsft Roatay Nominal Pulldown 30,500 lbs Unloading Speed 150 rpm Stroke 16.7 ft(CP Version) 32.8 ft (THD version) Main winch Nominal Pullback 40,500 – 51.750 lbs Secondary Winch Nominal Pullback 18,000 lbs Engine Brand CATERPILLAR Model C9 Power 325 HP @ 2,100 rpm Hydraulic System Hydraulic Oil Tank 221
- Published in Drill Rig
Lo Dril DH20
Specifications Weight 5,900 lbs (without bar set) Height w/o tooling 18’3″ Crowd Stroker 36″ Kelly Winch Pullmaster H-12 Hoist Speed 140 fpm Lower Speed 605 fpm Service Winch Pullmaster PL-5 Equal Speed 159 Fpm Rotary Torque 21,500 ft-lbs Drilling Speed 30-60 rpm Spin-off Speed 100 rpm Kelly 80 ft – 7 Element Squar Locking
- Published in Drill Rig, Uncategorized
Hitachi Zaxis 240 LC -G
Specifications Engine Type 4-cycle water-cooled, common rail direct injection Aspiration Turbocharged, intercooled No. of cylinders 4 ISO 9249, net 132 kW (164 HP) at 2 150 min-1 (rpm) SAE J1349, net 122 kW (164 HP) at 2 150 min-1 (rpm) Maximum torque 637 Nm (65 kgf m) at 1 800 min-1 (rpm) Piston displacement 6.494
- Published in Drill Rig
Sky master SJ 30 ARS
At various sites, SJ 30 ARS will respond to the mobility of 4 ton car bodyworks to the area which “far less” did not reach until now. By extending the head and working range, it is possible to work in a wide area with one setting. OVERVIEW More convenient Safer Excellent maintenance. Easy diagnosis OK in
- Published in Straight Boomlift
TW500
Specifications Model TW500 Weights Gross 3,550 kg Load on front axel 2000 kg Load on rear axel 1,550 kg Speeds Low 7.7 km/h High 10.4 km/h Vibrating Power Frequency 52Hz Centrifugal Force 29.4 kN Minimum Turning Radius 4.3m Gradability 44% Engine ISUZU Diesel Enginer Model “4LE1” Rated Output 29.6 KW Brake System Service Brake Hydrostatic
- Published in Vibratory Compactor
DCA-13ESY
SPECIFICATIONS frequency Hz 50/60 Rated voltage V Three-phase 200/220 output kVA 10/13 Current A 30.3 / 34.1 Fuel / tank capacity L Light oil / 62 Fuel consumption L / h 2.1 / 2.65 full length mm 1,390 Full width mm 650 Total height mm 900 Dry weight 490 Maintenance mass 555
- Published in Denyo Generator Set, Products
DCA-25ESI
SPECIFICATIONS frequency Hz 50/60 Rated voltage V Three-phase 200/220 output kVA 20/25 Current A 57.7 / 65.6 Fuel / tank capacity L Light oil / 198 Fuel consumption L / h 3.3 / 4.2 full length mm 1,540 Full width mm 680 Total height mm 1,340 Dry weight 705 Maintenance mass 895
- Published in Denyo Generator Set, Products
DCA-45USI
Specifications Model DCA-220ESM Rated Output Prime 200/220kVA Stand by 220/242kVA Voltage ( ) indicates options. 190~220V/190~240V 380~440V/380~480V Power Factor Three Phase 0.8 Engine Mitsubishi 6D24-TLE2B Fuel Diesel Tank Capacity 380L Dimension L×W×H 3,700×1,300×1,750mm Weight 3,630kg Sound Level (From 7m) 50Hz 61dB 60Hz 63dB Options Contact your supplier for non-standard requests. Automatic start and stop device
- Published in Denyo Generator Set, Products
DCA-60ESH
Specifications Model DCA-60ESH Rated Output Prime 50/60kVA Stand by 55/66kVA Voltage ( ) indicates options. 190~220V/200~240V (380~440V/380~480V) Power Factor Three Phase 0.8 Engine Hino W04D-TG Fuel Diesel Tank Capacity 125L Dimension L×W×H 2,050×880×1,250mm Weight 1,240kg Sound Level (From 7m) 50Hz 61dB 60Hz 64dB Options Contact your supplier for non-standard requests. Automatic start and stop device
- Published in Denyo Generator Set, Products
DCA-150ESH
Specifications Model DCA-150 ESH (M) Rated Output Prime 180/361kVA Stand by 197/394kVA Voltage ( ) indicates options. 200~220V 400~440/ Power Factor Three Phase 0.8 Engine Mitsubishi 6 D 16 – TLE 2 D Fuel Diesel Tank Capacity 250L Dimension L×W×H 3200×1180×1,500mm Weight 3,630kg Sound Level (From 7m) 50Hz 61dB 60Hz 63dB Options Contact your supplier
- Published in Denyo Generator Set, Products